Insinger Commander 18-5 Manuel d'utilisateur télécharger pdf (Page 12)

Door Type Series DOC COM 1.0 06

www.insingermachine.com 800-344-4802

PART 2 INSTALLATION INSTRUCTIONS

Chemicals

Upon the completed installation of the dishwasher,

contact a local detergent/chemical supplier for

the correct chemicals for your soil load and

geographical area.

Electrical connection points for the detergent

dispenser and rinse injector are located inside the

control panel. Refer to the wiring diagram for this

machine for the proper connection points.

Dispensers may be connected on either the

primary voltage side of the machine or the 24VAC

control voltage side.

CAUTION:

As with any 3 phase system, an electrician must check

all motors for proper phasing, i.e., Pump motors must be

running in direction indicated by arrow on housing.

Mechanical Connections

Connect 140º water lines for tank fill/booster as

tagged and noted on the installation drawings. If

machine is provided with steam heat connect the

steam lines and steam condensate lines as tagged

and noted on installation drawings. Connect the

drain line.

CAUTION:

Drain lines must be as specified on installation

drawings.

Drain line should be properly vented and should have

fall of not less than 1/4” to the foot of proper flow.

Some area plumbing codes require drains

to flow into an open gap with an opening twice

the diameter of the pipe.

Check with your local plumbing codes for the type of

drain connection required.

CAUTION:

All lines must be flushed prior to use to remove debris.

CAUTION:

Do not reduce the size of lines as specified in installation

drawings. All Lines are sized to facilitate necessary

flows, pressures, etc.

HVAC

Ventilation system must be sized to provide ade-

quate ventilation per machine specs. Refer to spec

sheet.

Tabling

Load and unload tables should be pitched towards

the machine to return excess water into the

machine.

Insinger dishmachines are user-friendly, making

them easy to operate and maintain. By following

the operation procedure and general cleaning pro-

cedures your Insinger dishwasher will give you

years of trouble free service.

CAUTION:

When connecting on the 24VAC control voltage side of

the transformer, total VA must not exceed 50VA.

The detergent density probe should be installed in

the hole provided & labeled in the wash tank.

A switch on the control panel labeled “Wash Cycle”

is provided for de-liming the machine. When

activated, this switch will keep the machine in an

indefinite wash cycle. This feature can also be used

to wash heavily soiled ware on an extended wash

cycle.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 54 55

Commentaires sur ces manuels

Pas de commentaire

Insinger Commander 18-5 Manuel d'utilisateur Page 12

Commentaires sur ces manuels

Produits connexes et manuels pour Radiateurs Insinger Commander 18-5